Quick Start Guide

Edited

Video Instructions

Installation

  1. Attach Roll Bar Mount to Roll Bar:

    • Secure the roll bar mount close to your camera source (e.g., data logger, included Lipstick Camera).

    • Avoid mounting near the driver or high-traffic areas in the car.

  2. Attach the Clip to the Device:

    • Slide the clip into the roll bar mount until you hear a click.

    • Press down on the rubber flap to lock the clip in place.

    • Tighten the thumbscrews completely to secure the mount.

  3. Connect GPX Mobile to the Camera Source:

    • For the Lipstick Camera:

      • Plug the USB-C cable into the lower USB port marked with a USB icon. Do not use the CHARGE port as it does not transmit data.

      • Mount the Lipstick Camera using the provided roll bar mount and extension rod.

    • For Data Loggers:

      • Use the HDMI cable to connect the data logger’s output to the GPX Mobile’s HDMI port.

Operation

  1. Unlock the Device: Enter the PIN code: 9696.

  2. Launch the GPX Stream App: Open the pre-installed GPX Stream application.

  3. Select the Camera: Choose the connected camera source (HDMI, USB, built-in Rear camera).

  4. Lock the Screen: Lock the device screen to save battery life.

  5. Login to GPX Dash: Use your email and password to log into the GPX Dash dashboard.

  6. Select Your Device: Tap on the GPX Mobile listed in your devices.

  7. Start Streaming: Tap the "Start" button to go live

Pro Tips:

  • Locking your screen can double the battery life.

  • Adjust the streaming quality from GPX Dash to match network conditions (Low, Medium, High settings).

GPX Mobile_Operation.pdf
2.4MB
GPX Mobile_Installation.pdf
2.5MB